• New
New

Trialcom MIX-62+

$2,796,500
Qty
Out-of-Stock

The MIX-62 + Console is one of the most compact radio consoles, it has all the audio and signaling features just like any larger console.

Thanks to its low cost and extensive features, it makes this product the ideal choice for new radio broadcasters. The MIX-62 + stands out for its great acceptance in the market due to its versatility and practicality.

The MIX-62 + Console has been conceived and built in accordance with existing electrical safety standards and regulations.

The Console is made up of:
MIC / LINE STEREO CHANNELS (Channels 1 to 4)
LINE / LINE CHANNELS (Channels 5 and 6)
TELEPHONE HYBRID
MASTER OUTPUT
MONITOR
TALKBACK
LED indicator VU


Together these channels allow up to 4 microphones to be connected simultaneously. They have a voltage of 48 volts to feed them with Phantom and avoid placing external power sources.


The equalizers for the first four channels are located under a protective cover, accessible by removing two setscrews. These allow you to adjust the high and low frequency equalization of each channel.
Benefits


The MIX-62 + Console incorporates the following features:
4 channels with Balanced Line / Microphone inputs with 48V Phantom
2 channels with Balanced Line / Unbalanced Line inputs
2 channels of Telephone Hybrids
2 Stereo Master outputs, PROGRAM 1 and PROGRAM 2
Independent Audio Monitoring to Studio and Control
Two-band equalizer for the first four channels
Level meters to Led, in the console panel
Optional turret with LED level meter or classics, with amplified CUE speaker
Optional turret with analog or LED level meters, with amplified CUE speaker
Gain adjustment per channel
Sliding potentiometers 100mm with 300,000 operating cycles
VCA technology for audio management
3 allocation bars: CUE, PGM1 and PGM2
Multiple selector for control monitoring and studies
Phantom source on all four microphone channels
Commands microphone for Study and Telephone Hybrid

Available accessories
Turret with analog level meters
Turret with LED level meters
Headphone distributor PH-4000
SA-1 Air Poster
RS-1 Clock
Combined SAR-1 air and clock sign.


TECHNICAL SPECIFICATIONS


MICROPHONE INPUT MODULE (1 - 4) SEC. TO
Input type and typical balanced level
electronically -65 / -40 dB
Noise level referred to input -127 dBm
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
Gain control action 20 dB
48 V DC Phantom Source
STEREO INPUT MODULE (1 - 4) SEC. B
Input type and typical unbalanced stereo level, -
15 / +15 dB
Input level 0 dBm
Gain control action 20 dB
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
STEREO INPUT MODULE (5 - 6) SEC. TO
Input type and typical unbalanced stereo level, -
15 / +15 dB
Input level 0 dBm
Gain control action 20 dB
Frequency Response 20 Hz - 20 kHz
+/- 0.1 dB
STEREO INPUT MODULE (5 - 6) SEC. B
Balanced stereo input type, -15 /
+15 dB
Input level 0 dBm
Gain control action 20 dB
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
TELEPHONE HYBRID MODULE (1 and 2)
Telephone line input
RJ-11
Telephone output
standard RJ-11
Hybrid type balanced bridge
with transformers
Rejection (@ 1 kHz) typical> 35 dB (depending on the
telephone line)
MASTER MODULE
Electronically balanced output type + AUX
unbalanced
Output level + 6 dBm
balanced
Maximum output level +21 dBm
balanced
Signal / Noise Ratio> 70 dB
Crosstalk L-R (@ 1 kHz / 0 dBm)> 70 dB
Distortion (@ 1 kHz / 0 dBm) <0.05%

MONITORING MODULE


Headphone output operator
Output power 0.125 W (max @ 8 ohm)
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
Load impedance 8 O / 4 O (typical 32 ohm)
Studio headphone output
Output power 0.125 W (max @ 8 ohm)
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
Load impedance 8 O / 4 O (typical 32 ohm)
Cue Amplifier
Output power 0.125 W (max @ 8 ohm)
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
Talking Transducer
built-in 2.5 ”
Control and Study line outputs
Output power 0.125 W (max @ 8 ohm)
Frequency response 20 Hz - 20 kHz
+/- 0.1 dB
Load impedance 8 O / 4 O (typical 32 ohm)
Signal / Noise Ratio> 70dB
Crosstalk L-R (@ 1 kHz / 0 dBm)> 70 dB
Distortion (@ 1 kHz / 0 dBm) <0.05%


GENERAL


AC 220 V power supply (50 / 60Hz +/- 10%)
110 V AC optional
Dimensions 540 mm x 527 mm x 35 to 165 mm
Weight 7.8 kg
Product weight with packaging 10,8 kg

Applications
Professional Radio and TV Audio Studios
Audio editing or layout studies.
Audio production studios.

FEATURED PRODUCTS